Electrical Appliance Connection & Replacement in London

Electrical Appliance Connection & Replacement in London

RCD Electrical connects and replaces fixed and hard-wired electrical appliances across London, after checking the appliance rating, circuit condition, isolation and manufacturer requirements.

Ovens, Hobs & Fixed Appliances Circuit & Isolation Checks London Appointments
Book Appliance Service 020 3488 2928
Electrical appliance connection and replacement in London

Fixed Appliances Connected Around The Appliance and Existing Circuit

RCD Electrical connects and replaces selected fixed and hard-wired appliances after checking the rating, cable, protective device, isolation and connection point. The aim is a safe, tidy installation that follows the manufacturer’s instructions and suits the existing electrical supply.

Ovens, hobs, cookers and selected fixed appliances Existing circuit and isolation checked first Electrical testing completed within the agreed scope
01 · Service overview

What Electrical Appliance Connection and Replacement Can Include

The work depends on the appliance rating, its connection method and whether the existing circuit is suitable for the new load.

01

Like-for-Like Replacement

An old appliance is safely disconnected and a compatible replacement is connected to an existing suitable supply.

02

Hard-Wired Appliance Connection

Ovens, hobs, cookers and other fixed equipment can be connected through the correct outlet, isolator or fused connection point.

03

Circuit Changes Where Required

If the rating or connection differs, the circuit, cable, protection or local isolation may need alteration before the appliance is used.

The appliance and circuit must be considered together. A new appliance should not be connected simply because the cable reaches. If the supply trips, shows heat damage or cannot support the rating, arrange electrical fault finding before connection.
02 · Appliances and connection methods

Fixed Appliances We Can Assess for Connection or Replacement

These are common examples. The model, rating, terminal arrangement and manufacturer’s instructions are checked before work is confirmed.

01

Electric Ovens

Single and selected double ovens connected by plug, fused connection unit or fixed wiring, subject to the appliance rating.

02

Electric and Induction Hobs

Hobs often require a suitable cooker circuit, cable and accessible isolation. The stated maximum load is checked before connection.

03

Freestanding Electric Cookers

Cookers can be connected to a compatible outlet and control arrangement after the circuit and protective device have been checked.

04

Cooker Hoods and Extractor Fans

Electrical connection can be arranged where the supply, local isolation and manufacturer’s requirements are suitable.

05

Integrated Kitchen Appliances

Selected dishwashers, washing machines and tumble dryers can be electrically connected or replaced within the agreed scope.

06

Selected Commercial Equipment

Staff-kitchen and fixed commercial appliances may be assessed where the supply, phase, rating and access are known.

The connection method is not interchangeable

Plug-In, Fused and Hard-Wired Appliances Need Different Checks

The rating plate and instructions determine whether the appliance can use a 13A plug, needs a fused connection unit or requires a dedicated circuit. An unsuitable supply may need a consumer unit assessment, new circuit work through our electrical contractor service, or targeted wiring improvements before connection.

03 · Supply suitability and electrical safety

What Must Be Checked Before a Fixed Appliance Is Connected

A replacement appliance may draw more current than the old model. The supply must be checked against the new appliance, not assumed from what was fitted before.

Rating

Read the Appliance Data

The maximum load, voltage, phase and manufacturer’s connection instructions determine the required supply.

Circuit

Check Cable and Protection

The cable size, route, breaker or RCBO and available capacity must suit the connected load.

Isolate

Provide Safe Local Control

The appliance needs a suitable means of isolation that can be identified and reached when required.

Test

Verify the Completed Work

Connections, earthing, polarity and relevant circuit tests are checked before the appliance is handed over.

Connection design note

The visible plug or outlet does not prove the circuit is suitable. Appliance rating, protective device, cable condition and manufacturer requirements must be reviewed together.

Electrical work in dwellings should follow Approved Document P. Electrical Safety First also provides wiring guidance for cooker, oven and hob circuits based on appliance rating and connection requirements.
04 · From appliance details to handover

How an Electrical Appliance Is Connected or Replaced

The process starts with the model and existing supply, then ends with a secure connection, electrical checks and clear handover.

  1. 01

    Appliance and Site Details

    We review the make, model, rating, connection type, property access and details of the existing appliance.

  2. 02

    Supply and Isolation Check

    The circuit, cable, protective device, outlet, earthing and local isolation are assessed for the proposed appliance.

  3. 03

    Disconnect and Connect

    The old appliance is electrically isolated and disconnected, then the replacement is connected within the agreed scope.

  4. 04

    Testing and Handover

    Relevant electrical checks are completed, operation is confirmed and any limitations or further work are explained.

Before the appointment

Send the Details That Affect the Connection

A clear rating label and photos can show whether a simple replacement or a wider electrical assessment is likely.

  • Provide the appliance make and model
  • Send a photo of the rating label
  • Show the existing plug, outlet or isolator
  • Mention tripping, heat damage or access limits
Existing electrical problems should be resolved before the appliance is used. Repeated tripping may require fault diagnosis, unsuitable protection may need a consumer unit review, and a new dedicated supply can be planned through our electrical contractor service.
Work Not Included Unless Agreed
  • Gas disconnection or gas appliance work
  • Water, waste or plumbing connections
  • Cabinet alterations, worktops or making good
  • Internal appliance diagnosis or component repair
05 · Suitable properties and situations

Where Appliance Connection and Replacement Is Commonly Needed

The service suits properties where a fixed appliance needs safe electrical disconnection, connection or a supply check before use.

Home

Homes and Kitchen Refurbishments

Connect a replacement oven, hob, cooker or hood after checking the existing supply and new appliance rating.

Rent

Rental and Managed Properties

Replace failed or outdated fixed appliances with clear access arrangements and a record of the electrical work completed.

Work

Offices and Staff Kitchens

Connect selected fixed kitchen equipment where the circuit, use, access and shutdown requirements are understood.

Trade

Selected Commercial Premises

Assess fixed or higher-load equipment where appliance data, phase requirements and the available supply can be confirmed.

Appliance The model, rating and connection instructions are checked first.
Supply The circuit and local isolation must suit the proposed load.
Scope Electrical work is separated clearly from plumbing, gas and cabinetry.
If the existing supply is unsuitable

We Confirm the Electrical Work Needed Before Connection

A damaged outlet, overloaded circuit or incorrect protective device should not be hidden behind a new appliance.

View Consumer Unit Service
06 · Connection costs and quotations

What Affects the Cost of Appliance Connection or Replacement

Cost depends on the appliance, connection method, access and condition of the existing circuit. A like-for-like replacement is different from adding a new circuit or changing the supply.

The appliance details define the real scope Send the postcode, model number and photos of the existing connection so the correct appointment can be arranged.
Like-for-Like Replacement
Quoted

For disconnecting an old appliance and connecting a compatible replacement to an existing suitable supply.

Access, appliance weight, connection type and the condition of the outlet or cable affect the quote.
Request an Assessment Call Now
Electrical suitability is checked first
Changed Appliance Different Rating or Connection
Quoted

For an appliance that needs a different outlet, isolator, cable arrangement or protective device.

The rating, circuit capacity, cable route and required testing shape the final scope.
Request an Assessment Call Now
Site assessment may be required
New Circuit or Commercial Work
Quoted

For higher-load, three-phase or selected commercial appliances requiring wider electrical work.

Consumer-unit capacity, cable route, access, shutdowns and certification affect the quotation.
Request an Assessment Call Now
Survey and design may be required

The quotation covers the agreed electrical scope. Appliance supply, delivery, removal, plumbing, gas work, cabinetry and making good are included only when stated.

07 · Safe connection, circuit loading and certification

Why Correct Appliance Connection Matters

A fixed appliance can place a sustained load on its circuit. Correct connection reduces the risk of overheating, nuisance tripping, damaged terminals and an appliance being used on an unsuitable supply.

Do not keep using an appliance that causes heat, smoke, sparking or repeated tripping. Isolate it where safe and arrange prompt help from an emergency electrician in London.

Appliance rating and connection method The New Appliance May Need More Than the Old Connection

Two appliances that fit the same opening can have different electrical ratings. The new model may need a dedicated circuit, different outlet or revised protective device.

Read the rating plate

The stated load and connection instructions are the starting point for the electrical assessment.

Check the connection type

A 13A plug, fused spur and cooker outlet are not suitable substitutes for one another without checking the design.

Confirm manufacturer requirements

Cable, isolation, clearances and terminal arrangements should follow the appliance instructions.

Electrical Safety First provides practical guidance on safe oven and grill installation, including when a dedicated circuit may be needed.

Cable loading and protective devices A Suitable Breaker Does Not Automatically Mean a Suitable Circuit

Cable size, installation method, circuit length, protective device and existing demand all affect whether the supply can carry the appliance safely.

Cable condition and size

The visible end is only part of the circuit. Damage, undersizing or unsuitable routing can affect safe loading.

Breaker or RCBO selection

The device must protect the cable and meet the disconnection requirements of the installation.

Existing circuit demand

Other connected loads and the consumer unit’s capacity may affect what can be added safely.

Where the circuit trips, overheats or tests poorly, it may need fault investigation before the appliance can be connected.

Isolation, terminals and fire prevention Secure Connections and Accessible Isolation Reduce Risk

Loose terminals and poor isolation arrangements can create heat or make maintenance unsafe. The connection point must suit the appliance and remain serviceable.

Correct terminal preparation

Conductors should be securely terminated without exposed copper, damaged insulation or strain on the connection.

Suitable local isolation

The appliance should be capable of being safely isolated for maintenance or replacement.

No improvised extensions

High-load fixed appliances should not rely on extension leads or unsuitable adaptors.

Electrical Safety First explains common household appliance ratings. Burning smells, discolouration, buzzing or hot accessories are warning signs that need electrical attention.

Testing, certificates and Part P The Paperwork Depends on the Electrical Work Completed

A straightforward connection and a new circuit are not the same scope. The inspection, testing, certificate and building-control route depend on what has been altered.

Existing connection

Relevant checks confirm that the appliance has been connected to a suitable existing supply.

Circuit alteration

An alteration may require a Minor Electrical Installation Works Certificate, depending on the work.

New circuit

A new circuit normally requires an Electrical Installation Certificate and may be notifiable under Part P.

Government guidance explains electrical safety requirements under Approved Document P. The correct route is confirmed after the work scope is known.

Check the supply before the appliance is used

Match the Appliance Rating to the Circuit and Connection

Send the model number, rating label, postcode and photos of the existing outlet or isolator. We will use them to identify the right next step.

Book an Assessment 020 3488 2928
Before you book

Details That Help Us Assess Your Appliance Connection

A useful enquiry identifies the new appliance, the old connection and any electrical warning signs. This helps distinguish a simple replacement from circuit alteration or a new supply.

Send the Appliance Details

Provide the make, model, rating label and manufacturer’s installation instructions where available.

Photograph the Existing Connection

Show the plug, fused spur, cooker outlet, isolator and consumer unit without removing covers.

Mention Access and Other Trades

Confirm whether the old appliance is removed and whether plumbing, gas, worktop or cabinet work is being handled separately.

Book an Assessment Call 020 3488 2928
Electrical appliance connection and replacement assessment by RCD Electrical in London
Electrical appliance connection guidance for UK properties

Appliance Connection and Replacement Questions

Short answers about ovens, hobs, cookers, connection methods, circuit capacity, testing, certification and booking an electrician in London.

The appliance rating and existing supply are checked together

Model data, cable, protective device, isolation and connection type determine whether the appliance can be connected safely.

01What appliances can RCD Electrical connect or replace?

We assess selected fixed and hard-wired appliances, including electric ovens, hobs, cookers, cooker hoods and some integrated kitchen equipment. Suitability depends on the appliance and existing supply.

02Can you connect an electric oven, hob or cooker?

Yes, subject to the appliance rating, connection instructions, circuit capacity, cable, protective device and local isolation being suitable.

03Does a like-for-like appliance replacement still need electrical checks?

Yes. A replacement may have a different rating or connection arrangement, and the existing outlet or circuit may have damage that was not visible before removal.

04Can an appliance be connected with a normal 13A plug?

Only where the manufacturer permits it and the appliance rating is suitable. Higher-load appliances may need a fused or hard-wired connection and a dedicated circuit.

05Does an oven or hob need a dedicated circuit?

Many higher-load ovens, hobs and cookers do. The answer depends on the stated load, manufacturer’s instructions and the design of the existing installation.

06How do you check whether the existing circuit is suitable?

The electrician reviews the appliance data, cable, protective device, connection point, isolation, earthing and relevant test results before confirming connection.

07Can you disconnect and remove the old appliance?

Electrical disconnection can be included. Physical removal, disposal, lifting or delivery must be agreed in advance and may require separate arrangements.

08What happens during the appointment?

The appliance and supply are checked, the old unit is safely disconnected where applicable, the new unit is connected, and relevant electrical tests are completed.

09What affects the cost of appliance connection?

Cost depends on the appliance rating, connection type, access, existing circuit condition, required alterations, testing and whether a new circuit is needed.

10Does the service include plumbing or gas work?

No, unless expressly agreed through a suitable separate service. Water, waste and gas connections should be handled by appropriately qualified trades.

11Will I receive an electrical certificate?

The paperwork depends on the work completed. A circuit alteration or new circuit may require a Minor Works Certificate or Electrical Installation Certificate.

12Must the electrician be NICEIC registered?

NICEIC is one recognised registration route. The essential point is that the person is competent for the work and follows the correct testing, certification and Part P route where applicable.

13What if the appliance trips the circuit after connection?

Stop using it and arrange investigation. The cause may be the appliance, connection, circuit or protective device and should not be guessed.

14Do you work in rental and commercial properties?

Yes, selected work can be arranged for homes, rental properties, offices and commercial premises after the appliance, supply, access and shutdown requirements are confirmed.

Send the appliance details before booking

Show Us the Rating Label and Existing Connection

Include the postcode, make, model, rating label, photos and any known tripping, heat damage or access restrictions.

Book an Assessment 020 3488 2928
Related electrical services

A replacement appliance may reveal a damaged outlet, unsuitable circuit, limited consumer-unit capacity or a wider fault that needs attention first.

New supplies and project work

Electrical Contractor Services

Plan dedicated circuits, isolation and coordinated electrical work for domestic or commercial appliances. Tripping or heat damage

Fault Finding & Fixing

Investigate repeated tripping, damaged outlets, hot cables or unexplained appliance supply faults. Circuit protection and capacity

Fuse Box Installation

Assess whether the consumer unit can provide suitable protection for a new or higher-load appliance circuit. Wider installation condition

EICR Testing

Inspect the fixed installation where its overall condition needs to be understood beyond one appliance circuit. Ageing or unsuitable wiring

Electrical Rewiring

Replace targeted or wider wiring where the existing installation cannot support planned fixed appliances. Urgent appliance supply faults

Emergency Electrician

Arrange urgent help for burning smells, sparking, hot accessories, smoke or sudden loss of power. Connected appliance controls

Data Wiring & Cabling

Provide structured cabling where networked controls or wider building systems form part of the project. Commercial coordination

Fire Alarm Services

Review fire alarm considerations where commercial kitchen or electrical work affects existing systems. Shared and commercial areas

Emergency Lighting

Check emergency lighting where appliance or electrical work affects shared commercial routes or ceilings. Whole-property demand

EV Charger Installation

Consider combined electrical demand where high-load appliances and EV charging share the same property supply.
London coverage

Electrical Appliance Connection Across London

We arrange appliance connection and replacement assessments across Central, West and North West London, including the areas listed below.

  • Fulham
  • Hammersmith
  • Chelsea
  • Kensington
  • Holland Park
  • Putney
  • Battersea
  • Westminster
  • Central London
  • West London
  • North West London
  • Blackfriars
  • Golders Green
  • Finchley
  • Hendon
  • Hampstead
  • West Hampstead

For a property outside these locations, send us the postcode and we will confirm whether an appointment can be arranged.

Connect or replace a fixed appliance in London

Book an Appliance Connection Assessment

Book online, call us or send the appliance model and connection photos through our contact page.

Book an Assessment 020 3488 2928

RCD Electrical provides certified electrical services across London, including emergency call-outs, EICR certificates, fault finding, rewiring and consumer unit upgrades.

⚡ Book an Electrician →

CONTACT RCD

☎
Landline 020 3488 2928
✉
Email info@rcdelectrician.co.uk
⌂
Headquarters 13 St Bride Street,
London EC4A 4AS
#
Company Registration 12910130
✓

CERTIFIED ELECTRICIANS

Safe, compliant and professional electrical work across London.

⚡

EMERGENCY SUPPORT

Fast electrical help for homes, landlords and businesses.

© 2026 RCD Electrical Ltd. All Rights Reserved.
Company Registration Number: 12910130
Website Design & Copyright by Eliaweb Eliaweb Logo